top of page

One-Deck Wetroom Kit for Tiled Floors

A complete linear wetroom system for tiled floors, combining the One-Deck single fall floor former, Purus Living linear drain and paint-on tanking system in one kit.

​

Manufactured from high-strength XPS with a tough, impact-resistant surface, One-Deck provides a lightweight solution for timber or solid floors, with a choice of drain grids and waste outlets to suit different installation requirements.

​

​All components are also available separately.

​

​

Single Fall Gradient  |  20 x 20mm Minimum Tile Size  |  Up to 72 L/m Drain  |  Up to 10m² Tanking

One Deck wetroom former Logo
One Deck single fall wetroom former Kit

One-Deck Key Features

  • High-strength XPS construction

  • Tough, impact-resistant surface

  • Single gradient towards the linear drain

  • Suitable for timber and solid floors with full support underneath

  • High compressive strength permits tiles from 20 x 20mm

  • Can be cut to size where required

  • Manufactured in the UK

What's Included in the One-Deck Kit?

  • One-Deck Single-fall wetroom former

  • Purus Living linear drain (600mm or 800mm)

  • Choice of drain grid

  • Choice of waste outlet

  • 9kg Innovations paint-on tanking system

  • Installation instructions 

Sizes

1200 x 1000 x 22mm

ODK1210

One-Deck 1200 x 1000mm single fall wetroom floor former

1800 x 1200 x 32mm

ODK1812

One-Deck 1800 x 1200mm single fall wetroom floor former tray

Why Choose a One-Deck Wetroom Former?

One-Deck is designed for wetrooms where a clean, contemporary floor finish is required. Unlike traditional wetroom formers with falls from multiple directions, One-Deck uses a long single gradient towards the linear drain and an entirely removeable short single gradient behind the drain.

This makes it particularly suitable for larger-format tiles, helping to achieve a simpler, more consistent tiled appearance. Its lightweight XPS construction also makes the former easy to handle and cut on site.

Suitable for Timber & Solid Floors

One-Deck can be installed on timber or solid floor constructions. On timber floors, the former must be fully supported underneath in accordance with the installation instructions. For solid floors, the former can be recessed.

Purus Living Linear Wetroom Drain

The One-Deck kit includes a choice of 600mm or 800mm Purus Living linear drain, providing a contemporary drainage solution with a choice of grid finishes and three waste outlet options to suit different installation depths and drainage requirements.

Purus Living linear wetroom drain tile insert with low outlet

Drain Lengths: 600mm or 800mm

Maximum Flow Rate: 72 L/min

Connection: 40mm solvent weld

Trap: Spring-loaded NOOD no-odour trap

Waste outlets: Low, Side or End Parallel

Tile Insert Finishes

Brushed Brass 

Code -BBTI

Black

Code - MBTI

Bronze

Code - BZTI

Purus Linear Drain Tile Insert Bronze Finish 52739BZ
Purus Linear Drain Tile Insert Black Finish 52739MB
Purus Linear Drain Tile Insert Brushed Brass Finish 52739BR

Twist Grate

Stainless steel decorative linear grate providing a more visible contemporary drain finish.

Code -TSS

Purus Living Linear Stainless Steel Twist Drain 52742

Linear Drain Waste Outlet Options

Choose from three waste outlet configurations to suit the available installation depth and direction of the waste pipe.

Low 52mm Outlet

Flow Rate: 32 L/min

Supplied as Standard

Purus Living Linear low 52mm Nood Waste Outlet
Purus Living Linear low 52mm Nood Waste Outlet

Projects 74mm below the tray

Side 105mm Outlet

Flow Rate: Up to 72 L/min

Purus Living Linear Standard 105mm Nood Waste Outlet
Purus Living Linear Standard 105mm Nood Waste Outlet

Projects 131mm below the tray

End Parallel Outlet

Flow Rate: Up to 72 L/min

Purus Living Linear End Parallel 105mm Nood Waste Outlet
Purus Living Linear End Parallel 105mm Nood Waste Outlet

Projects 131mm below the tray

Complete Wetroom Tanking System Included

Every One-Deck tiled-floor kit includes our Innovations paint-on tanking system, providing a continuous waterproof membrane across the wetroom floor and surrounding wet area before tiling.

innovations 9kg paint-on wetroom tanking system

Included:

  • 9kg tanking liquid

  • 10m joint tape

  • 2 internal corners

  • 2 pipe collars

  • 1 litre primer

  • Application brush 

Up to 10m² Coverage  |  No Mixing Required  |  Flexible Membrane  |  Suitable with Underfloor Heating

One-Deck Installation Instructions

Always read the installation instructions before beginning work and check that the former, drain and floor construction are suitable for the intended installation.

Need Help? Contact Technical Support

One-Deck Wetroom Kit FAQs

What is a single-fall wetroom former?

A single-fall former has one continuous gradient towards the drain, rather than falls from several directions. This makes it particularly suitable for creating a clean, contemporary tiled floor without the need for many tile cuts.

​​

Can One-Deck be installed on timber floors?

Yes. One-Deck can be installed on timber floors, provided the former is fully supported underneath in accordance with the installation instructions.

 

Can One-Deck be installed on concrete floors?

Yes. One-Deck is suitable for solid floor installations and can be recessed into the floor construction where required.

​

Can I use large-format tiles with One-Deck?

Yes. The single gradient is particularly suitable for larger-format tiles, helping to create a consistent floor finish without multiple changes in direction.

​

Can One-Deck be cut to size?

Yes. One-Deck can be cut to almost any size to suit the available space.

​

Does One-Deck need tanking before tiling?

Yes. The wetroom must be correctly waterproofed before tiling. The kit includes our paint-on tanking system for waterproofing the former and surrounding wet area.​​​​​​​​​

bottom of page