Wetrooms are the modern, stylish, minimalist way to add a shower to virtually any space. Many Wetroom designs can be seen in glossy magazines, on-line or on TV that can give the impression you need loads of space and will have to spend many thousands to get your dream shower space.
Wetroom Innovations is here to show you how you can transform even the most modest space in to the luxurious bathroom or en-suite.
Planning the Perfect Wetroom
Conventional bathroom design can be thrown out of the window, with a wetroom your imagination can run wild. The options are wide and variable and here is a way your designs can be created. Simply download and print out the two page pdf to get started.
- Draw your room size, door and windows
- Cut out and position the wetroom items
- Plan and position a screen (if you need one)
- Find all the correct items you need at Wetroom Innovations.
Wetroom Design Inspiration
Here are a few designs to show what can be done in a variety of rooms to give you a few ideas
A wetroom shower replacing a bath in a typical bathroom
Hot Water tank removed to have both
Corner bath leaves a large shower area
With no shower tray space is maximised
Screens can fold away leaving the full floor area clear
A large shower area in a small space
Yes you can go even smaller
Being creative in the width of built in wardrobes
Wash and Go in your fitted bedroom
Tiny wetroom but practical
You could even fit a wetroom shower under your stairs
No need to shower in a corner, hinged flippers on screens
Keeping it simple in a small space
make a cubicle by adding a glass screen door
Wetroom design to allow space for large whirlpool bath
Get really creative with the possibilities
Wet spaces in rooms rather than separate wetrooms
Guiding Principles for Wetroom Design
These are not “hard and fast” rules but a few things you might want to consider are:
- Windows are best kept outside the “wet area” this is for privacy as well practicalities.
- Try and avoid having the toilet as the first thing you see when you come through the door.
- If possible try and keep access to the toilet and sink as a dry space.
- A large shower area is also comfortable to dry off in so you don’t need a separate space for this.
Don’t worry about the practicalities of the drainage and pipe runs etc. at this early stage our kits handle most situations. Virtually anything is possible. Drainage details and options are discussed in GUIDE 4.
Plumbing and the Wetroom Shower
DIY Wetroom does not supply the hardware for the shower mixers or heads. What we do is supply the materials you might need to free your imagination. With our tile board you can construct “false walls” easily.
Type of floor – Suspended timber, floor boards, chipboard, solid concrete, don’t worry about that yet, there are options for all types. Read more about wet room floors GUIDE 2.
Splashing where you don’t want it
If you have a big big room you might not need a screen.
In smaller rooms a screen (or wall) will keep your other fittings, towels and toilet paper dry.
Sinks and toilets can be in wet areas, but most people prefer a screen to separate them from the splash zone.
Free standing baths can be and often are in the splash zone. Baths with side panels are best kept out of the splash zone so water doesn’t get trapped behind the panels
Wetroom Splash pattern radius
Main wet drainage area size – where does most of the water go? What floor area needs to slope towards the drain?
The shower pressure and head size and the mounting of the head e.g.Wall mounted or overhead influence where the showering water goes.
With so many variables, we have used the typical spread from a ceiling mounted, “monsoon” type head as a working guide. The stream of water flowing from the shower and off the body is approximately 1m diameter (500mm radius) at floor level. The Splashing area is approximately 2m diameter at floor level.
Minimum showering area
The bigger the showering area the more luxurious. Most people will feel able to shower in a 700mm x 700mm area. A rectangular area 700mm x 900m is much more comfortable. On the Wetroom design PDF guide we indicate an 800 x 800mm square
Wet Room Floor Former size
The smallest floor former (sloping deck to give a fall to the drain) is 800 x 800mm and may be cut to size.
The total wet floor area can be reduced by walls or screens. When the screen is not sealed to the floor it is recommended that the sloping floor area extends 30mm beyond the screen
The splash zone 1m radius can be flat but must be tanked and tiled.
Simple glass screens reduce the wet floor area and splash zones. A screen is used to keep the rest of the room dry it could be a short screen to stop most splashing on to toilets and basins etc.
Or a medium sized screen to keep the most of the floor space dry.
Or large screens with flippers or doors to construct a cubicle.
Small screen - keeps towels dry
Larger screens - drier floor area
Increase screen cover with a hinged flipper
Add a door to make cubicle
Hinged screens to free the space
Lose a bath or have both
With a wetroom you might be able to retain the bath (unlike with a shower cubicle). Free standing baths can be included in the wet area.
En-suite or in the bedroom.
A wetroom with screen or wall allows the creation of practical en-suite without constructing a separate room. It is possible to create an en-suite in a very small area.
All kits, tanking /waterproofing products screens and doors are available from the Wetroom Innovations