The UKs leading Wetroom Innovator & Trade Distribution Outlet
Extruded XPS tray with a tough hard wearing impact resistant surface.
Single fall down to the drain and can be cut to any size.
This kit is designed for use with Tiled Floors.
One-Deck Key Features;​​​
-
Suitable for timber (with support) or concrete floors.
-
Single fall down to drain.
-
High compressive strength permits use of 20mm x 20mm mosaics.
-
Solid construction with no holes or pockets..
-
Can be cut to size.
-
Built in single gradient for water removal to the waste.
-
Manufactured in the UK.
Kit Contents;​
-
One-Deck former.
-
Purus Linear 600mm or 800mm drain.
-
Choice of grid and outlet.
-
Up to 72 litres/minute flow rate.
-
8kg paint on tanking system. (covers 7-10 square meters).
-
Installation instructions.
SIZES
ODK1210
1200 x 1000mm
ODK1812
1800 x 1200mm
PURUS LIVING LINEAR DRAIN
-
Choice of grids.
-
Choice of 3 waste outlets.
-
Up to 72 litres/minute flow rate.
-
40mm solvent weld connection.
-
Spring loaded Nood no-odour trap.
GRID OPTIONS
TILE INSERT
Supplied as Standard
TWIST GRATE
Code - TSS
BRUSHED BRASS
Code -BBTI
BLACK
Code - MBTI
BRONZE
Code - BZTI
LOW 52mm - 32 l/min
WASTE OUTLET OPTIONS
SIDE 105mm - 72 l/min
END PARALLEL 105mm - 72 l/min
Tile Insert Drain Technical Drawing
Twist Drain Technical Drawing
PAINT ON TANKING SYSTEM
Tanking Kit Contents;​
-
8k Tanking liquid.
-
10 Meters of joint tape.
-
2 x Internal corners.
-
2 x Pipe collars.
-
1 Litre primer.
-
75mm Brush.
-
Easy to use paint on system.
-
Covers up to 10m2.
-
Ready to use, no mixing required.
-
Dries into a flexible sheet membrane.
-
Suitable for use with underfloor heating.
