Innovations Logo
Top MenuHomeContact UsFAQDesignInstallationPhoto Gallery
Home
Wetfloor Products
Wetroom Kits
Channel Drain
Screens & Doors
Side Menu
Glo-screens

Underlay and Floor Former Products

Maxxus Logo

Maxxus Wetfloor Former

Fast 1 hour installation

Maxxus wetfloor former is designed to facilitate level-access showering in timber or concrete.

It relieves floor space permitting greater access, mobility, freedom and lighter more open and contemporary ambience.
Maxxus and Minimax

Maxxus and Minimax
For the unique Purus Minimax patented drain - the world's shallowest (69mm) drain incorporating a trap, the unique NOOD (no odour) trap without a water seal.

Vinyl or Tiled finish with the same Minimax drain.

  • Square stainless steel grating supplied for tiling
  • Circular grate for vinly can be upgraded to stainless steel

Purus MiniMax

  • Flow 47 litres per minute
  • Projection beneath tray only 62mm (horizontal outlet) or 127mm (vertical outlet)
Maxxus has been tested under static load at 1000mm centres. Super-strong Maxxus made from vacuum formed GRP will .comfortably support a sustained load of 75 stone (470 kilos) load over 16" (400mm) joist centres without deflection. Maxxus Load

Benefits:
Maxxus can be rotated to avoid joists etc - simply rotate to place the drain hole in the ideal position

Maxxus Rotate pieces
  • May be trimmed down to any size
  • Totally flat underside for easy fixing
  • Recessed screw holes allow easy fixing

Maxxus Diagram

  • No release agent to inhibit bonding of adhesives, tanking or membranes
  • Level-access floor - no step
  • 25 year guarantee
  • Needs no underboarding

Click for Maxxus Fitting Instructions

Back

Maxxus Wetfloor Former Sizes :
900x900
1000 x 1000
1135 x 700
1200 x 1200
1300 x 800
1400 x 900
1500 x 800

1500 x 1200

1800 x 820
Maxxus 1450 x 1150

Maxxus for Tiling
Cross-section Maxxus with Tiling finish
Maxxus for Vinyl
Cross-section Maxxus with Vinyl finish

Underlay Former (Sloping Wet Floor)

Underlay
Horizontal Drain

The underlay is the sloping floor that defines the "wet area" and allows water to run into the special drain. The drain and pipe reducer are both included.

The underlay has an EPS foam core, 20mm thick. It needs to be supported with plywood between the joists.

Provides a level access for the whole floor without a step.

Available in squares or rectangles with offset drain hole to allow the location of the waste pipe between floor joists. It can be rotated to suit the location and trimmed by 60-70mm off each edge or even notched to fit around obstructions (eg boxed-in soil pipe). It is easy to fit into a concrete or timber floor.

Underlay 1950 x 950 End Drain
Underlay 1950 x 950 End Drain

Compatible with Designer Grids

Sizes:
800 x 800, 900 x 900, 1000 x 1000, 1200 x 1200, 1200 x 900, 1200 x 800, 1500 x 1500, 1500 x 800, 1500 x 1050, 1300 x 800, 1850 x 900mm, 1950 x 950mm
Other sizes at extra cost.

Made to Measure Sizes on Request

Footer