Innovations Logo
Top MenuHomeContact UsFAQDesignInstallationPhoto Gallery
Home
Wetfloor Products
Wetroom Kits
Channel Drain
Screens & Doors
Side Menu
Glo-screens

Tanking Products

Granfix Tanking Liquid Kit (8 kilos)

Finest value kit available.
Tanking Liquid Kit
Granfix Tanking is the best quality tanking available.

  • Suitable for all flat or vertical surfaces made of any material.
  • Simple to use low-cost product for novices and experts alike.
  • Compatible with under-floor heating and ready for tiling with no further preparation.

Use: Brush on a first coat with 3" brush in one direction.
Apply Flex-Tape (supplied) along all joints, wall/join and vertically up internal conrners and bed into Granfix with brush.
Allow to dry overnight or flash off 2hrs then apply second coat at 90 degrees.
Clean tools and brush with water.

Useage: Covers 7 mt.sq (2 coats).

Contents: 8k Granfix, 1 litre Primer for timber/plasterboard, 10 mt Flex Tape, 2 Flex corners, 1 Brush.

Click here for Technical Specification

WOP Tanking Membrane

A very versatile product, this is a tile backer board (tbb) on a roll.

Compatible with UFH (Under Floor Heating)

For walls and floors only 0.15mm thick, also decouples.

Use: Bond with flexible tile adhesive, overlap joints 70mm to seal.
Add interior or exterior corners for a secure tanked room.

Size: 1000mm wide.
5, 10, 15, 20, 25 sq. mtrs.

Click here for Technical Specification

BSA Sheet Membrane

BSA Membrane BSA (Bitumen Self Adhesive) sheet membrane for tanking.
1000 wide, 5 sq m. or 10 sq m

Back

Tile Backer Board (WEDI Option)

Marmox Banner

Made from the same material as underlay by Marmox or PCI.

Top spec board with hard surface. Fully waterproof for wet areas.

For walls, floors, bath panels, partitions, bath enclosures, cubicles, vanity units.

Marmox certification
Tile Backer Board
Tile Backer Board

  • A high performance, reinforced insulation board made of waterproof extruded polystrene that has a fibreglass mesh embedded into a cement polymer mortar on each face.
  • The perfect solution for insulating and waterproofing in one operation.
  • Forms a membrane by using Flex Tape over joints and perimeter edges or using Granfix Tanking Liquid.
  • Perfect for UFH (Under Floor Heating) - prevents downward heat loss.

A versatile building board that insulates and waterproofs. Cut with a knife or score to form curves.

No water or humidity absorption.

Sizes:
600 x 2500 x 4, 6, 10, 12.5, 20, 30, 40, 50, 60mm
600 x 1250 x 4, 6, 10, 12.5mm

30mm Bath Panels for tiling.
Side only 2100 x 600mm
Side and End 1770 x 600mm & 730 x 600mm

Benefits

  • The ultimate waterproof board for wet areas, not merely moisture resistant
  • High thermal insulation
  • High compression strength compared to similar materials
  • Closed cell structure means no water or humidity absorption - waterproof
  • Not affected by freeze/thaw cycle
  • Safe to use - asbestos-free
  • CFC and HCFC free
  • Easy to cut with a knife or saw
  • Boards are light enough to be carred and installed by one person
  • Boards fix or bond to any surface
  • Ready to receive plaster or tiles
  • Soundproofing properties
  • 10 year manufactuers warranty

Click for TBB Accessories

4 Stages of wetroom build using BSA membrane
4 stages of wetroom build - stage 1
Stage 1
4 stages of wetroom build - stage 2
Stage 2 - Maxxus
4 stages of wetroom build - stage 3
Stage 3 - BSA
4 stages of wetroom build - stage 4
Stage 4 - UFH
Footer