Maxxus-in-a-Box

Maxxus Wetfloor Former is designed to facilitate level-access showering in timber or concrete.

It relieves floor space permitting greater access, mobility, freedom and lighter more open and contemporary ambience

Maxxus is 22mm thick at the edges.
Maxxus has a 50mm flat perimeter band, therefore the maximum showering area is 100mm less than the size shown.
Drain projection beneath tray = 62mm (horizontal outlet only) or 127mm (vertical outlet only).
Drain flow is 47 litres per minute.
Minimax diameter below bottom of the deck 140mm
Minimax projection below bottom of the deck 63mm

Click for Maxxus Fitting Instructions

Kit Contents:

• 1 Maxxus for level access
• 1 Minimax drain c/w stainless grid. Horizontal or vertical outlet (please specify)
• 1 Pipe Reducer 2" to 1.5" (50mm to 40mm)
• 1 Tanking Liquid (Lastogum) - covers 7 mt sq.
• 1 Litre Primer for porous surfaces
• 10 mt Flextape for wall/floor joint and other gaps
• 2 Flex Internal corners
• 2 Flex Pipe collars
• 75mm or 100mm Brush

Note - If supplied for vinyl flooring a stainless steel grid and tanking kit is not required.

Supplied without Screen: (for screens see Beta Screens) and information below.

Easily converted into a full kit: by the addition of a
fixed BETA screen panel or BETA hinged door 2000mm high in 6mm, 8mm or 10mm clear or satinised.
BETA screens are totally frameless and minimalist;
brochures on request. KIT PRICES include 6mm clear
BETA screens and hardware at widths stated, but
widths of 300mm to 1400mm are available.
BETA screens and doors are all-British to BS6206 Class A.

Cross-section Maxxus with Tiling finish

Cross-section Maxxus with Vinyl finish

Back

Maxxus Wetfloor Former Sizes :

Tuff Form Floor Fomer
Requires underboarding - 1500 x 1200mm only